BR9040F |
RFQ for BR9040F Required Field |
 |
| Product | Manufacturers | Pack | D/C |
| BR9040F | - | 2008 | - |
The BR90 series are serial EEPROMs that can be connected directly to a serial port and can be erased and written electrically. Writing and reading is performed in word units, using four types of operation commands. Communication occurs through CS, SK, DI, and DO pins, WC pin control is used to initiate a write disabled state, enabling these EEPROMs to be used as one-time ROMs. During writing, operation is checked via the internal status check.
Features |
| •BR9010 / F / FV (1k bit): 64 words x16 bitsBR9020 / F (2k bit): 128 wordsx 16 bitsBR9040 / F (4k bit): 256 words x16 bits•Single power supply operation•Serial data input and output•Automatic erase-before-write•Low current consumption1.5mA (max.) active current: 3V2mA (max.) standby current: 3V•Noise filter built intoSK pin•Compact DIP8, SOP8, SSOP-B8 packages (SSOPB8is available only with BR9010).•100,000 ERASE / WRITE cycles•10 years Data Retention•Easily connects to serial port |
|
Parameter |
Symbol |
Limits |
Unit | |
| Applied voltage |
Vcc |
0.3 ~ + 6.5 |
V | |
| Power dissipation |
Pd |
DIP8 SOP8 SSOP-B8 |
500*1 350*2 300*3 |
mW |
| Storage temperature |
Tstg |
65 ~ + 125 |
°C | |
| Operating temperature |
Topr |
40 ~ + 85 |
°C | |
| Terminal voltage |
- |
0.3 ~ Vcc + 0.3 |
V | |
| Models | MFG | Pack |
| BR9040 | SOP8 | |
| BR9040F | 2008 | |
| BR9040F0E1 | ||
| BR9040F-DE2 | ||
| BR9040F-E1 | ||
| BR9040F-E2 | ||
| BR9040FV | ||
| BR9040FV-DE2 | ||
| BR9040F-WE1 | ||
| BR9040F-WE2 | ||
| BR9040-W | DIP-8 | |
| BR9010 | 00+ | |
| BR9010FV | TSOP-8 | |
| BR9010FV-W | TSSOP | |
| BR9010FV-WE2 | ||
| BR9010RFVM-W-TLB | ||
| BR9011B | ||
| BR9011BF-RE2 | ||
| BR93LC46F-T2 | ||
| BR93LC46F-TI |
